Product Introduction
Forklift Diesel 5 Ton
- Efficient Air Intake: High-position independent channel prevents dust entry, increases airflow, and ensures more complete combustion.
- Advanced Cooling System: Independent layouts for intercooling, water, and oil dispersion enhance the reliability of the engine, gearbox, and core components.
- Powerful & Reliable Engine: High-voltage common rail engine delivers strong output, better cold starts, lower failure rates, and reduced overall fuel consumption.
- Optimized Hydraulics & Braking: Load-sensing hydraulic system lowers fuel use, while vacuum or full hydraulic power brakes ensure safe and reliable operation.
Showcase of 5 ton diesel forklift
Protection in transportation
As an important loading and unloading equipment in marine engineering, forklift trucks need to take a series of protective measures before shipment and during transportation to ensure that they arrive at their destinations safely and without damage. The following are some commonly used protective measures for forklift truck shipment:
1. Cleaning and descaling: Before shipment, forklift trucks should be thoroughly cleaned to remove surface stains and grease to prevent corrosion or contamination of other cargoes during ocean transportation.
2. Anti-corrosion treatments: For metal parts, especially exposed parts, anti-corrosion treatments can be done, such as spraying rust inhibitors or coating with anti-corrosion coatings.
3. Securing and strapping: -Fasten the forklift trucks in the transportation carrier (e.g., cabin or container), usually with special fastening devices and straps to ensure that the forklift trucks will not move during the bumpy sea. -Pay special attention to protect the key parts of the forklift, such as the hydraulic system, steering system, oil cylinder, etc., to avoid leakage or damage caused by violent vibration.
Attachments Designed for Versatility
1. Paper Roll Clamp: Mainly used for handling and stacking paper roll goods, it can clamp the paper rolls to avoid rolling down or damage in the process of handling.
2. Carton Clamp (Carton Clamp): suitable for handling the whole layer of cartons or similar products of soft packaging goods, can clamp and lift multiple boxes to improve handling efficiency.
3. soft package clamp (Bag Clamp): used for clamping and handling bags, woven bags, and other soft packaging goods, such as grain, fertilizer, and chemical raw materials.
4. Push-Pull (Push-Pull): Used to pull the pallet or trailer before and after, especially in the absence of pallet exchange stations, to facilitate the realization of pallet-free transport.
5. Launcher (Pallet Truck Attachment): Used to launch the goods from the pallet to facilitate unloading or finishing.
Translated with DeepL.com (free version)
About LTMG
Reliable Manufacturing
fAQ
1. Why choose us?
As a manufacturer, LTMG Industrial is committed to offering not only products with high quality and performance and competitive price, but also on-time delivery and comprehensive 7/24 after-sales services.
2. What is the product range of our factory?
LTMG Industrial is a large-scale machinery manufacturing enterprise that primarily specializes in supplying wheel loaders, skid steer loaders, forklift trucks, excavators, and related attachments. We can also customize non-standard products according to customers' requirements.
3. What payment terms can we accept?
Normally 30% deposit is required in advance, 70% balance shall be settled before shipment. And 100% irrevocable L/C at sight with the terms we agreed, can also be accepted.
4. What Certificates do we have?
All products meet the ISO9001 Quality System and have acquired the CE certificate. EPA approval will be available if needed.
5. How about our delivery time?
Usually it will take 15 to 30 days after receiving your deposit. About standard products, we always have them in stock and can deliver them immediately. But customized products will take more time, depending on the requirements of your order.
6. Can we provide OEM service?
LTMG Industrial can provide customized products according to customers' requirements, both OEM and ODM are acceptable.
5 Ton diesel forklift Parameters
|
Model |
FD50(mini) |
|||
|
Power Type |
Diesel |
|||
|
Rated Capacity |
kg |
5000 |
||
|
Load Centre |
mm |
500 |
||
|
Lift Height |
mm |
3000 |
||
|
Fork Size(L×W×T) |
mm |
1070×150×50 |
||
|
Mast Tilt Angle(F/R) |
Deg |
6°/12° |
||
|
Front Overhang (Wheel center to fork face) |
mm |
579 |
||
|
Ground Clearance(Bottom of mast) |
mm |
150 |
||
|
Turning Radius (outside) |
mm |
2910 |
||
|
Max.Gradeability (No load/Full load) |
% |
20 |
||
|
Wheelbase |
mm |
2100 |
||
|
Service weight |
kg |
6700 |
||
|
|
Length to face of fork(Without fork) |
mm |
3260 |
|
|
Overall Width |
mm |
1460 |
||
|
Mast Lowered Height |
mm |
2270 |
||
|
Mast Extended Height(With backrest) |
mm |
4165 |
||
|
Overhead Guard Height |
mm |
2340 |
||
|
|
Travel (Full load) |
km/h |
25 |
|
|
Lifting (Full load) |
mm/s |
380 |
||
|
|
Front |
mm |
300-15-18PR |
|
|
Rear |
mm |
7.00-12-12PR |
||
|
Battery |
Voltage/Capacity |
V/Ah |
(12/80) x 2 |
|
|
Engine |
Model |
6BG1-02 |
4DX23 |
|
|
Manufacture |
ISUZU |
XICHAI |
||
|
Rated output/r.p.m. |
kw |
82.4/2000 |
60/2200 |
|
|
Rated torque/r.p.m. |
N·m |
416.8/1500 |
320/1400-1700 |
|
|
No.of Cylinder |
6 |
4 |
||
|
Bore×Stroke |
mm |
105×125 |
102x118 |
|
|
Displacement |
cc |
6494 |
3875 |
|
|
Fuel Tank Capacity |
L |
130 |
130 |
|
|
Transmission |
Type |
Hydraulic |
Hydraulic |
|
|
Stage(FWD/RVS) |
2/1 |
2/1 |
||
With technological innovation, our product configuration and parameters will continue to change without notice.
If there is any doubt, the specific confirmation of our international trade sales shall prevail.
Hot Tags: forklift diesel 5 ton, China forklift diesel 5 ton manufacturers, new pallet jack, electric stock picker, Manual Pallet Stacker Supplier in China, Chinese 4 Wheel Electric Forklift Supplier, Telescopic Fork Truck, MEWPS Mobile Elevating Work Platform Manufacturer
